Free 0 service with every newly delivered Leffert series vehicle*.
Congratulations on your new purchase! Or are you looking at purchasing a vehicle from the leffert series?
Every new vehicle comes with a free 0 service. This service can be carried out on location by Frisian Motors after the vehicle has driven about 500 km (average 2 months after delivery). Below you will find some of the work that is carried out during a 0-turn. We mainly look for parts that need to be tightened or tensioned after the first kilometers. In this way, problems can often be prevented in the future. In addition, it is important to check batteries. Batteries are the heart of your vehicle. At the 0 service, the batteries have had their first charge and can be checked that everything is working properly.
* Excluding the Leffert FM-40
Some points that are picked up at a 0-turn:
- Inspection for play in wheel bearings, brake calipers and wishbones, thru-axles, tighten bolts if necessary
- Checking that brake pistons are moveable
- Handbrake tensioning, 4 rear lubrication points, tire pressure 1.8 bar
- Control oil drive bench
- Check play on steering, steering box protective cover and steering rod
- Measuring batteries voltage per piece
- Battery terminals and battery cables
- Explanation of vehicle use and storage (also explained on delivery)
Prerequisites:
- Only applicable to vehicles ordered and delivered in the Netherlands
- 0-turn is performed by Frisian Motors on customer's location
- Customer must register their vehicle online within 3 weeks of delivery to claim the free 0 service
- Customer should contact Frisian Motors themselves to schedule an appointment. please do so approximately 3 weeks prior to reaching 500 miles on the vehicle.
- Work environment requirements for on-site service: Space to perform work frost-free and rain-free on hard subfloor with adequate lighting and a 220v power outlet.
- Entitlement to the free 0 service expires after more than 800 km driven or not performed within 6 months of purchase.